The EY collets, European-type with 16° taper, are accumulation of our technological experience for more than 40 years and achievement as a maker specializing in collet chucks. They are made of strictly selected material with our sophisticated heat treatment technology and the precision finishing work, thus enabling to assure the superior endurance and the high accuracy.
Accuracy is guarenteed as show in the table per the collet capacities
• EY Holders
Model
L
Capacity
Lock-nut O.D
S20T-EYC11-P2
45 · 60 · 00 · 00
0.5 ~ 7.00
19
S20T-EYC12-P2
45 · 60 · 75 · 90
0.5 ~ 7.00
19
S20T-EYC16-P2
45 · 60 · 75 · 00
0.5 ~ 10.0
27
S20T-EYC20-P2
45 · 60 · 75 · 00
0.5 ~ 13.0
34
S20T-EYC25-P2
60 · 75 · 00 · 00
0.5 ~ 16.0
42
Model
L
Capacity
Lock-nut O.D
BT30-EYC11
60 · 90 · 105
0.5 ~ 7.00
23
BT30-EYC16
60 · 90 · 105
0.5 ~ 10.0
30
BT30-EYC20
60 · 90 · 105
0.5 ~ 13.0
36
BT30-EYC25
60 · 90 · 105
0.5 ~ 16.0
42
BT30-EYC32
75 · 105 · 00
1.5 ~ 20.0
50
Model
L
Capacity
Lock-nut O.D
S20-EYC11
85 · 1150
0.5 ~ 7.00
18.9
S20-EYC16
95 · 1250
0.5 ~ 10.0
28
S20-EYC20
110 · 130
0.5 ~ 13.0
34
S25-EYC16
110 · 130
0.5 ~ 10.0
28
S25-EYC20
115 · 135
0.5 ~ 13.0
34
S25-EYC25
125 · 000
0.5 ~ 16.0
42
S32-EYC20
115 · 000
0.5 ~ 13.0
34
S32-EYC25
120 · 000
0.5 ~ 16.0
42
S32-EYC32
130 · 000
2.0 ~ 20.0
50
Model
L
Capacity
Lock-nut O.D
SL3/4"-EYC11
60 · 95
0.5 ~ 7.00
18.9
SL3/4"-EYC16
60 · 95
0.5 ~ 10.0
28
SL20-EYC11
60 · 95
0.5 ~ 7.00
18.9
SL20-EYC16
60 · 95
0.5 ~ 10.0
28
SL25-EYC16
65 · 85
0.5 ~ 10.0
28
SL25-EYC20
75 · 95
0.5 ~ 13.0
34
SL1"-EYC16
65 · 85
0.5 ~ 10.0
28
SL1"-EYC20
75 · 95
0.5 ~ 13.0
34
• EY Tool Change Adapters
Saving time for adjusting the tool length. No need to do on-off work of the collet on work site. No need to modify the spindle nose. It is a very troublesome work, taking a lot of time, to adjust the tool length precisely. EY tool change adapters save the trouble and the time and the adjustment can be done securely. And the tool changing itself can be done easily even in a very limited space.
